Description
Product Description
Spray Booth Specifications
--Wall panel: sandwich style, δ=50mm, rock wool. (Polystyrene is optional)
--Basement: concrete structure made by the customers, 2 rows of grids, 3D lifts as optional.
--Door: 4 pcs of front door without aluminum side cover. 2 pcs of emergency door with pressure lock.
--Two units of 11kw intake fans and two units of 11kw exhaust fans
--2 pcs of floor filter and 2 pcs of air mouth filter.
--Upper light: 20 sets, 4*40w per set. side lights: 16sets, 4*40w.
--Two sets of exhaust/intake ducts, 5m straight, one 90° bend, and one 60° bend
each. two sets of chimney, 5m straight and 2 small bends.
--2sets of manual VCD exhaust/intake dampers, electrical VCD as optional.
--Spraying/baking transition damper, automatically air controlled.
--Heat exchanger: stainless steel. 2units of RIELLO RG5S burners.
--Roof filter: 16 pcs of filter, mounted above support frame, which is made of steel and powder coated.
--Control box: imported components, overload, overheat, phase-lacking,
phase-lacking protection , engine star-delta start.
--Automatically stop when preset time is up.Constant temperature spraying.
--Environmental filter :either M style or drawer style active carbon equipment can be adopted.
Model No. | External Size (m) | Internal Size (m) | Air Flow (m3/h) | Air Speed (m/s) | Power (kw) | Vehicle Suited |
W-15000 | 15.15x8.85x5.6 | 15x5x4.8 | 24000 x3 | 0.3-0.5 | 46 | Bus & Truck |