Description
Car Oil Extractor, Multi-Function Pneumatic Oil Drainer
Technical parameters
Vacuum level: below 0-08PA Working pressure:8-10PA
Transparent glass capacity: 1OL
Oil storage tank: 80L
Media: machine oil and gear lubricant
Diameter 4.5mm
collecting speed:0.8L/min
The greatest pressure:4KG/cm
Diameter 6.5mm collecting speed:1.6L/min
Oil Collector Operation Instruction
1. Pump waste oil to oil tank:
a. Connect a well-selected oil drain pipe and oil exhaust pipe and then insert them in the sight oil hole of the engine with lubricant, next switch off the oil exhaust pipe;
b. Turn on the switch of transparent glass connected to oil storage tank, switch off the elbow to prevent discharge of oil, switch off the quick coupler on the top of the tank and under the oil funnel;
c. Connect the quick coupler on the top of oil measuring glass to compressed air tube and switch on, while the indication of the vacuum gauge will decrease;
d. When the vacuum pressure lowers below 0.5 PA, switch on the oil exhaust pipe and thus the waste oil will be pumped out of the engine and flows to the tank quickly via the oil exhaust pipe.
2. Pump waste oil to transparent glass
a. Connect a well-selected oil drain pipe and oil exhaust pipe and then insert them in transparent glass of the engine with lubricant, next switch off the oil exhaust pipe;
b. Turn off the switch of transparent glass connected to oil storage tank;
c. Connect the quick coupler on the top of transparent glass to compressed air tube and switch on the compressed air tube, while the indication of the vacuum gauge M/ill decrease;
d. When the vacuum pressure lowers below 0.5 PA around: switch on the oil exhaust pipe and thus the waste oil will be pumped out of the engine and flows to the tank quickly via transparent glass .
3. Flow waste oil to the oil storage tank from transparent glass
Turn on the switch of transparent glass connected to oil storage tank, thus waste oil will be discharged to the oil storage tank from transparent glass .
4. Flow waste oil out of the oil storage tank
a. Turn off the switch of transparent glass connected to oil storage tank (notice: If it turns on excessive air pressure may damage transparent glass and even persons; we will assume no responsibility for man-made injuries due to improper operation.); and switch off the ball valve.
b.Switch on the elbow that hooks the tank.
c. Connect the quick coupler on the top of the tank to compressed air tube and switch on the compressed air tube, thus waste oil will be discharged via the elbow (notice: it may switch off the compressed air tube when the safety valve begins to exhaust.)
Notice: Air inflation must be available while pumping oil, by doing so it is to reduce gas consumption and pressure to realize faster pumping.