Description
Outside size: | 7000 x 5350 x 3400 mm (L x W x H) | Door size: | 3020 x 2600 mm (W x H) |
Inside size: | 6900 x 3900 x 2700 mm (L x W x H) | Gross power: | 48.5(KW) |
Foundation and floor (galvanized) | Foundation | Full galvanized metal foundation, full grids, The biggest features for it are beautiful, durable and better force bearing | |
Surface area of floor filter | 26 M² (area of grids) | ||
Galvanized metal basement | 300mm height, the ventilation effect is better than traditional spray booth | ||
Drive-in ramps | 3 big drive-in ramps, each size: 2000x1000mm | ||
Wall and door (rock wool) | Wallboard and roof panel | High quality double construction fireproof insulation rock wool panel, thickness: 50mm | |
3-folded entrance door with safety glass window | 1set, size: 3020x2600 mm (W x H), size is bigger than traditional spray booth | ||
Operator's door with safety glass window | 800x2000mm(W x H) | ||
Lighting | Ceiling lighting | 8units, each 4 x 36W, total 1152W | |
Side lighting | 8units, each 2 x 36W, total 576W | ||
Brightness | ≥1200 LUX | ||
Filtration system | Pre-filters | G3 grade pocket filter system, filtration effect is much better | |
Ceiling filter | EU5 grade high efficient filter | ||
Bottom filter and exhaust filter | Fibre glass paint-stop filter, Activated carbon filter | ||
Ventilation system | Inlet fan | 2 x 4KW, 380V, 50HZ, CE, Double intake centrifugal fan | |
Outlet fan | 1 x 5.5KW, 380V, 50HZ, CE, Double intake centrifugal fan | ||
Water-based paint motor fan | 2 x 1.5KW, 380V, 50HZ, CE, Turbo fan | ||
Total fan capacity | 26,000m³/h | ||
Air flow speed in cabin | 0.27m/s in empty booth, 0.28 - 0.35m/s in loaded booth | ||
Heating system | Temperature | Set temperature 60ºС, max baking temperature is 80°C | |
Heating Type | 10 units infrared heaters, total 30KW | ||
Heating time | 4-6minutes (from20 to 60ºС) under baking status | ||
Control system | Control system | Standard direct start control system | |
Function | Painting, infrared baking, lighting, emergency stop switch, failure indication, differential pressure gauge |